Front Seat Adjuster Track Finish Cover Replacement
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Front Seat Adjuster Finish Cover (Qty: 2) Tip: The 2 side covers snap into place. |
| 2 | Inner Adjuster Track Front Finish Cover Tip: When re-installing the finish cover, check the retainer for damage. If the retainer is damaged, reinsert a new retainer into the finish cover before installation. Tip: The inboard front cover snaps into place. |
| 3 | Inner Adjuster Track Rear Finish Cover Tip: The inboard rear cover snaps into place. |
| 4 | Front Seat Adjuster Finish Cover Tip: The seat belt cover snaps into place. |