Transmission Control Lever Knob Replacement
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Control Lever Knob Screw Procedure: Insert a flat bladed plastic trim tool between the boot and the knob releasing the retaining tab securing the boot to the knob in order to expose the screw.
NOTE:
Refer to Fastener Notice
.
Tighten: 6 N.m (53 lb in) |
| 2 | Automatic Transmission Control Lever Knob |