Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Position the shift lever in PARK.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

Fig 1: View Of Shift Control Linkage Rod

Courtesy of GENERAL MOTORS CORP.

Remove the nut from the shift control linkage rod.
Disconnect the shift control linkage rod from the shift control assembly.

Fig 2: View Of Manual Shift Shaft Nut

Courtesy of GENERAL MOTORS CORP.

Remove the manual shift shaft nut.
Remove the shift control linkage from the vehicle.