LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1101 (Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly >> Control Solenoid Valve Assembly Installation

Control Solenoid Valve Assembly Installation

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Control Solenoid Valve Assembly Component View
GM1627736Courtesy of GENERAL MOTORS CORP.
Control Solenoid Valve Assembly Installation

Callout Component Name
1 Control Solenoid (w/Body and TCM) Valve Assembly
Tip:  Note the locator pin on the control valve lower body assembly while aligning the control solenoid valve assembly.
2 Bolt M5 x 53 (Qty: 2)
Tip:  Hand tighten only.
3 Bolt M5 x 55 (Qty: 4)
Tip:  Hand tighten only.
4 Bolt M5 x 45 (Qty: 5)
Tip:  Hand tighten only.