2-6 Clutch Piston Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 2-6 Clutch Piston Component View

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	2-6 Clutch Spring Retaining Ring Tip: Ensure the DT-48065 is centered over the clutch spring. See Special Tools . Special Tool: DT-48065 Clutch Spring Compressor. See Special Tools .
2	2-6 Clutch Spring NOTE: Ensure the spring tabs are facing down during installation and that the tabs fit between the teeth on the piston. Failure to do so may cause damage to the clutch assembly.
3	2-6 Clutch Piston Assembly Tip: It may be necessary to apply air to the apply passage in order to unseat the piston.