LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Tahoe Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1093 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Driver Knee Bolster Replacement

Driver Knee Bolster Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Knee Bolster Replacement
GM1967590Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the left instrument panel insulator. Refer to Instrument Panel Insulator Replacement - Left Side .
  2. Remove the left instrument panel side trim panel. Refer to Instrument Panel Side Trim Panel Replacement .
1 Instrument Panel Driver Knee Bolster Assembly
Procedure: 
Grasp the knee bolster assembly and pull rearward in order to release the retainer clips securing the knee bolster assembly to the instrument panel.
scientia non olet · About LEMON Manuals