Rear Seat Back Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Back Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear seat cushion. Refer to Front Seat Replacement - Bucket Rear Seat Cushion Replacement .
1	Rear Seat Back Cushion Nut (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 30 N.m (22 lb ft)
2	Rear Seat Back Cushion Nut (Qty: 4) Tighten: 30 N.m (22 lb ft)
3	Rear Seat Back Cushion Assembly Procedure Remove the rear outboard shoulder belts from the should belt bezel and position out of the way. Pull the seat back cushion forward and upward to remove from the vehicle.