Sun Gear Shaft, Sun Gear Carrier, 1-3 Clutch Housing, and Main Shaft Removal
WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Sun Gear Shaft, Sun Gear Carrier, 1-3 Clutch Housing, and Main Shaft Removal
| Callout | Component Name |
|---|---|
| 1 | Sun Gear Shaft Assembly - 1st Position |
| 2 | Internal Gear Thrust Bearing Assembly - 2nd Position |
| 3 | Main Shaft Assembly |
| 4 | Sun Gear Carrier Assembly - 2nd Position |
| 5 | Sun Gear Assembly - 2nd Position |
| 6 | 1-3 Clutch Housing Assembly |
| 7 | Hybrid Direct, 2-3-4 Clutch Housing Thrust Bearing Assembly |
| 8 | Sun Gear Shaft Retaining Ring
WARNING:
Use care when removing or installing the retaining ring, or bodily injury may occur. |
| 9 | Sun Gear Shaft Assembly - 1st Position |
| 10 | Internal Gear - 2nd Position |