1-3 Clutch Housing, Sun Gear Carrier, and Sun Gear Installation

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 1-3 Clutch Housing, Sun Gear Carrier, and Sun Gear

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Hybrid Direct, 2-3-4 Clutch Housing Thrust Bearing Assembly
2	1-3 Clutch Housing Assembly Procedure Align the internal teeth of the 4th clutch plates to aid in installation. To ensure the clutch housing is fully seated measure from the case surface to the clutch housing hub, dimension (a). Specification Dimension (a) 253 mm (9.96 in)
3	Sun Gear Assembly - 2nd Position
4	Sun Gear Carrier Assembly - 2nd Position