LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1896 (Automatic Transmission - 2ML70 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Noise in First, Second, Third, Fourth, or Reverse Gear

Noise in First, Second, Third, Fourth, or Reverse Gear

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Noise in First, Second, Third, Fourth, or Reverse Gear

Checks Causes
Input Shaft Assembly (64) Inspect thrust washers, and ring gear for wear damage.
Sun Gear Carrier Assembly 1st - 2nd - 3rd Position (67, 77, 434) Inspect thrust washers, pinion gears, and pins for wear damage.
1-3 Clutch Housing Assembly (80) and 2-3-4 Clutch Assembly (471) Inspect for worn or damaged clutch bearing.