LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Suburban C2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1891 (Automatic Transmission - 2ML70 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Pipe Fitting Seal Replacement

Transmission Fluid Cooler Pipe Fitting Seal Replacement

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transmission Fluid Cooler Pipe Fitting Seal
GM1970145Courtesy of GENERAL MOTORS COMPANY
Transmission Fluid Cooler Pipe Fitting Seal Replacement

Callout Component Name

Preliminary Procedures

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the transmission fluid cooler pipes from the transmission. Refer to Transmission Fluid Cooler Pipe Replacement .
1 Trans Fluid Cooler Pipe Fitting Seal (Qty: 2)

Special Tools

  • DT 47770  Seal Installer
  • J 45201  Cooler Line Seal Remover