Clutch Pressure Plate Installation
WARNING: This page is about a different variant/trim than selected.
Clutch Pressure Plate Installation
| Callout | Component Name |
|---|---|
| 1 | Transfer Case Control Actuator Lever Washer |
| 2 | Transfer Case Four Wheel Drive Clutch Pressure - Apply - Plate |
| 3 | Transfer Case Four Wheel Drive Clutch Pressure Plate Spring (Qty: 4) |
| 4 | Transfer Case Four Wheel Drive Clutch Pressure Plates |
| 5 | Transfer Case Four Wheel Drive Clutch Hub |
| 6 | Transfer Case Four Wheel Drive Clutch Shim |
| 7 | Transfer Case Two/Four Wheel Drive Clutch Retaining Ring
NOTE:
The Transfer Case High/Low Clutch Reset must be performed after the transfer case is installed in the vehicle. |