Throttle Body Assembly Removal
WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the electrical wire harness connectors from the throttle body.
- Remove the throttle body nuts (507) and bolts (538).
- Remove the throttle body (508).
- Remove the throttle body gasket (509).
- Discard the gasket.
IMPORTANT:
The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.