Removal Procedure
WARNING: This page is about a different car, the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Cadillac Escalade EXT, 2012 Cadillac Escalade ESV, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transfer case. Refer to Transfer Case Assembly Replacement .
- Using the J 23907 slide hammer with bearing adapter (1), and J 36825 output shaft oil seal remover (2), remove the input seal.
IMPORTANT:
It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825 output shaft oil seal remover.