Conditions for Running the DTC

• The engine speed is 0-7500 RPM for 5 seconds.
• Vehicle speed is less than 200 km/h (124 mph)
• The estimated drive motor power loss is greater than 0.4 kw for 200 seconds.

P0711

• DTC P0721, P0722 or P0723, P0658, P0668, P0669, P06AD, P06AE, P077B, or P215C is not set.
• Vehicle speed is less than 200 km/h (124 mph).
• Transmission in not in Park or Neutral.
• The Trans. Fluid Temp. parameter is -50 to +21°C (-58 to +70°F) at start up.
• The ECT is greater than 70°C (158°F).
• The ECT is greater than 55°C (131°F) at start up.
• The vehicle speed is greater than 8 km/h (5 mph) for 300 seconds.
• The vehicle speed is less than 200 km/h (124 mph) for 5 seconds.
• The TCM temperature parameter is -49 to +169°C (-56 to +336°F).

P0712 

DTC P0712 is not failed this ignition cycle.

P0713 

DTC P0713 is not failed this ignition cycle.