Front Seat Replacement - Bucket (with HP2)

Fig 1: View Of Front Seat Assembly & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat adjuster covers. Disconnect the seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1	Front Seat Assembly Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 90 N.m (66 lb ft)
2	Front Seat Assembly Nut (Qty: 2) Tighten 55 N.m (41 lb ft)
3	Front Seat Assembly Procedure Disconnect the electrical connector.