Driver or Passenger Seat Replacement
Courtesy of GENERAL MOTORS COMPANY Driver or Passenger Seat Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- SIR Disabling and Enabling. Refer to SIR Disabling and Enabling
.
- Remove the front seat belt from the tensioner. Refer to Front Seat Belt Anchor Plate Tensioner Replacement
.
|
| 1 |
Driver or Passenger Seat Fastener (Qty: 2) Procedure
- Clean the threads with appropriate thread chaser.
- Fasteners are microencapsulated. Install NEW driver or passenger seat bolts. DO NOT reuse the old bolts.
Tighten
45 N.m (33 lb ft) |
| 2 |
Front Seat Assembly Procedure
- Disconnect the electrical connector.
- Transfer parts as necessary.
|