LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Orlando LS, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Instrument Panel Center Molding Replacement

Instrument Panel Center Molding Replacement

Fig 1: Instrument Panel Center Molding
GM2373474Courtesy of GENERAL MOTORS COMPANY
Instrument Panel Center Molding Replacement

Callout Component Name
1 Instrument Panel Center Molding

Procedure

  1. Set the parking brake and place the transmission control lever in lowest gear position.
  2. Disconnect the electrical connections.
  3. When replacing the instrument panel upper center trim panel, transfer all necessary parts.
scientia non olet · About LEMON Manuals