Trip 1
The trip odometer can be accessed through the driver information center switch Up/Down function.
| Driver Information Center Trip Display | Range | ||
|---|---|---|---|
| Europe-SI | USA | GB | |
| TRIP 1 | ####.#km | ####.#miles | ####.#miles |
Fuel Range
This message indicates the estimated distance that the vehicle can travel under the current fuel economy and fuel level conditions since the last battery connection to the instrument cluster. Fuel Range is calculated using the equation: Fuel Range = Range Distance/Range Fuel Used.
- Range Distance = The accumulated distance travelled since the last reset of this value.
- Fuel Used = The accumulated fuel delivered since the last reset of this value
The engine control module (ECM) sends the fuel range value to the instrument cluster. The instrument cluster receives a serial data message with fuel information. The fuel range value is retained during ignition OFF and can be changed between Europe-SI, USA and GB units by accessing the driver information center Units menu. The Fuel Range display cannot be reset. LOW is displayed when fuel range is below a predetermined value.
Average Fuel Economy
Average fuel economy is calculated using the equation: Average Fuel Economy = Distance/Fuel
- Distance = The accumulated distance travelled since the last reset of this value
- Fuel = The accumulated fuel consumption since the last reset of this value
The ECM sends the average fuel economy serial data message to the instrument cluster. The value of this mode is retained during ignition OFF and can be changed between English units and metric units by selecting from the driver information center options menu.
Instantaneous Fuel Economy
The ECM sends the instantaneous fuel economy serial data message to the instrument cluster. The value of this mode can be changed between English units and metric units by selecting from the driver information center options menu.
Average Vehicle Speed
Average speed is calculated using the equation: Average Speed = Average Speed Distance/Average Speed Time
- Distance = The accumulated distance travelled since the last reset of this value
- Ignition ON = The accumulated ignition on time since the last reset of this value
Units Menu
The unit mode is used to toggle between Europe-SI, USA and GB units and can be accessed through the driver information center Menu switch and the driver information center Set/Reset switch.