LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Impala LS, Gas >> Repair and Diagnosis >> Electrical >> Wiring Diagrams >> Wiring Systems And Power Management - Component Connector End Views - Heated Seat Module (KA1) X3 To Inflatable Restraint Roof Rail Module >> Component Connector End Views >> Secondary Air Injection (AIR) Pump Solenoid Bank 1 (NU5/NU6)

Secondary Air Injection (AIR) Pump Solenoid Bank 1 (NU5/NU6)

GM1399241Courtesy of
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 15443141
  • Service Connector: 19151506
  • Description: 5-Way F TS Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: Pending
  • Release Tool: Pending
  • Diagnostic Test Probe: Pending
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp : Pending
Secondary Air Injection (AIR) Pump Solenoid Bank 1 (NU5/NU6)

Pin Wire Circuit Function
1 0.5 WH 6452 Air Injection Reaction Pump Sensor Supply Voltage
2 0.5 BN/WH 6331 Air Injection Reaction Pump Pressure Sensor Signal
3 0.5 D-BU/WH 6785 Air Injection Reaction Control Valve #1 Low Reference
4 0.5 BK/WH 451 Signal Ground
5 PK/BK 415 Air Injection Reaction Solenoid Supply Voltage