Camshaft Position (CMP) Sensor - Bank 2 Intake
 Courtesy of
|
Connector Part Information
- Harness: Engine
- OEM Connector 15345983:
- Service Connector: 13580231
- Description: 3-Way F Kompakt 280 Series, Sealed (GY)
|
Terminal Part Information
- Terminated Lead: Pending
- Release Tool: J-38125-561
- Diagnostic Test Probe: J-35616-35 (VT)
- Terminal/Tray: Pending
- Core/Insulation Crimp: Pending
|
Camshaft Position (CMP) Sensor - Bank 2 Intake
| Pin |
Wire |
Circuit |
Function |
| 1 |
0.5 BN/WH |
5303 |
Low Reference |
| 2 |
0.5 YE |
5276 |
Camshaft Position (CMP) Sensor- Intake Bank 2 Signal |
| 3 |
0.5 L-BU |
5302 |
5-Volt 1 Reference |