Instrument Cluster Replacement

Fig 1: Instrument Cluster

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) trim plate. Refer to Instrument Panel Trim Plate Replacement .
1	Instrument Panel Cluster Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Procedure Disconnect the electrical connector. Refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedure
Remove the instrument panel (I/P) trim plate. Refer to Instrument Panel Trim Plate Replacement .

Instrument Panel Cluster Screw (Qty: 4)

CAUTION:

Tighten
2 N.m (18 lb in)

Instrument Panel Cluster Assembly

Procedure