Rear Seat Number 3 Retractor Side Belt Replacement - Right Side

Rear Seat Number 3 Retractor Side Belt Replacement - Right Side

Removal Procedure

1. Remove the seat belt escutcheon from the rear corner garnish molding.

2. Remove the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement Body Rear Corner Garnish Molding Replacement.





3. Remove the seat belt retractor retaining bolts from the seat belt retractor.

4. Remove the seat belt retractor from the vehicle.

Installation Procedure





1. Install the seat belt retractor to the vehicle.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the seat belt retractor retaining bolts to the vehicle.

* Tighten the seat belt retractor upper retaining bolt to 52 Nm (38 lb ft).

* Tighten the seat belt retractor lower retaining bolt to 10 Nm (89 lb in).

3. Install the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement Body Rear Corner Garnish Molding Replacement.

4. Secure the seat belt escutcheon to the rear corner garnish molding.