Hood Latch Cover Replacement

Hood Latch Cover Replacement

Removal Procedure

1. Raise and support the hood.
2. Remove the radiator grille. Refer to Grille Replacement (Base) Grille Replacement (Uplevel) .




3. Remove the push pin rivet retainers retaining the hood latch cover (3) to the radiator support.
4. Remove the hood latch cover (3) from the radiator support.

Installation Procedure




1. Install the hood latch cover (3) to the radiator support.
2. Install the push pin rivet retainers in order to retain the hood latch cover (3).
3. Install the radiator grille. Refer to Grille Replacement (Base) Grille Replacement (Uplevel) .
4. Close the hood.