12. Upper Oil Pan Removal

Upper Oil Pan Removal

Special Tools

J 37228 - Seal Cutter

For equivalent regional tools, refer to Special Tools Special Tools.





1. Remove the oil level indicator tube bracket bolt (3) and stud (2).

2. Remove the oil level indicator tube (1).





3. Remove the 2 oil pan to flywheel housing bolts (1).





4. Remove the upper oil pan bolts (2) and (4).

5. Remove the wiring harness clips (3).

6. Separate the upper oil pan from the engine block using J 37228 - cutter.

7. Remove the upper oil pan (1).