Rear Seat Number 2 Retractor Side Belt Replacement - Left Side

Rear Seat Number 2 Retractor Side Belt Replacement - Left Side

Removal Procedure





1. Remove the seat belt upper trim cover retainers (2).

2. Remove the seat belt upper trim cover (1).





3. Remove the upper seat belt guide retaining bolt from the seat belt guide.

4. Remove the upper seat belt guide from the vehicle.

5. Remove the body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side Body Side Trim Panel Replacement - Left Side.





6. Remove the seat belt retractor retaining bolt from the vehicle.

7. Remove the seat belt retractor from the vehicle.

Installation Procedure





1. Install the seat belt retractor to the vehicle.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the seat belt retractor retaining bolt to the vehicle and tighten to 52 Nm (38 lb ft).





3. Install the seat belt guide to the vehicle.

4. Install the seat belt guide retaining bolt to the vehicle and tighten to 52 Nm (38 lb ft).

5. Install the body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side Body Side Trim Panel Replacement - Left Side.





6. Install the seat belt upper trim cover retainers (2).

7. Install the seat belt upper trim cover (1).