Seat Belt Replacement - Center Rear (with Bench Seat)

Seat Belt Replacement - Center Rear (with Bench Seat)

Removal Procedure





1. Partially remove the seat cushion cover in order to gain access to the seat belt/buckle retaining bolt.

2. Remove the seat belt/buckle retaining bolt from the seat frame.

3. Remove the seat belt/buckle from the seat frame.

Installation Procedure





1. Install the seat belt/buckle to the seat frame.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the seat belt/buckle retaining bolt to the seat frame and tighten to 52 Nm (38 lb ft).

3. Install the seat cushion cover to the seat frame.