Radio Antenna Cable Extension Cable Replacement

Radio Antenna Cable Extension Cable Replacement

Removal Procedure

1. Remove the radio and mounting bracket. Refer to Radio Replacement Radio Replacement.

2. Remove the engine cover. Refer to Engine Cover Replacement Service and Repair.

3. Disconnect the antenna cable connector at the lower right of the instrument panel.





4. Remove the antenna cable (1) from the retaining clips on the instrument panel carrier.





5. Remove the antenna cable (1) from the vehicle.

Installation Procedure





1. Install the antenna cable (1) to the vehicle.





2. Install the cable (1) to the retaining clips on the instrument panel carrier.

3. Connect the antenna cable connector at the lower right of the instrument panel.

4. Install the engine cover. Refer to Engine Cover Replacement Service and Repair.

5. Install the radio mounting bracket and radio. Refer to Radio Replacement Radio Replacement.