80. Exhaust Manifold Installation - Right Side

Exhaust Manifold Installation - Right Side





1. Install the NEW exhaust manifold gaskets.





2. Install the exhaust manifold.

3. Install the spark plug wire shields.

4. If reusing the fasteners, apply threadlock GM P/N 12345493 (Canadian P/N 10953488) or equivalent, to the threads of the exhaust manifold bolts.

Caution:
Refer to Fastener Caution Fastener Caution.

5. Install the exhaust manifold bolts.

1. Tighten the exhaust manifold bolts on the first pass to 15 Nm (11 lb ft).

2. Tighten the exhaust manifold bolts on the final pass to 30 Nm (22 lb ft).

6. Install the spark plug wires to the spark plug wire retainers.

7. Install the spark plug wires onto the spark plugs.