76. Valve Rocker Arm Cover Installation - Right Side

Valve Rocker Arm Cover Installation - Right Side





Note:
Do not reuse the valve cover gasket or the valve rocker arm cover bolt grommets.

1. Install the NEW valve rocker arm cover gasket into the groove of the valve rocker arm cover.

2. Install the NEW valve rocker arm cover bolt grommets into the valve rocker arm cover.





3. Install the valve rocker arm cover onto the cylinder head.





Caution:
Refer to Fastener Caution Fastener Caution.

4. Install the valve rocker arm cover bolts and tighten to 12 Nm (106 lb in).