28. Piston and Connecting Rod Disassemble

Piston and Connecting Rod Disassemble

Special Tools

J 24086-C - Piston Pin Remover/Installer

For equivalent regional tools, refer to Special Tools Tools and Equipment.





Warning:
Refer to Safety Glasses Warning Safety Glasses Warning.


1. Remove the piston rings from the pistons.





2. Press the piston pin from the connecting rod using the J 24086-C - remover/installer.

The piston pin has an interference fit into the connecting rod, and is full floating in the piston.





3. Mark, separate, and organize the parts for assembly.