Drive Belt Idler Pulley Replacement - Right Side

Drive Belt Idler Pulley Replacement - Right Side

Removal Procedure





1. Loosen the idler pulley bolt.

2. Remove the drive belt. Refer to Drive Belt Replacement Service and Repair.

3. Remove the idler pulley.

Installation Procedure





1. Install the idler pulley.

2. Install the idler pulley bolt until snug.

3. Install the drive belt. Refer to Drive Belt Replacement Service and Repair.

Caution:
Refer to Fastener Caution Fastener Caution.

4. Tighten the idler pulley bolt to 50 Nm (37 lb ft).