85. Case Extension Bushing Replacement

Case Extension Bushing Replacement

Special Tools

* J 8092 - Driver Handle

* J 23062-14 - Bushing Remover

* J 34196-B - Transmission Bushing Service Set





1. Inspect the case extension for the following conditions:

* Porosity

* Cracks

* Nicks

* Burrs

* Worn bushings





2. Remove the case extension oil seal assembly (34) (model dependent).





3. Using the J 23062-14 - bushing removerand the J 8092 - driver handle, remove the case extension bushing (33).





4. Using the J 34196-4 which is part of kit J 34196-B - bushing service setand the J 8092 - driver handle, install a case extension bushing (33).