Auxiliary Temperature Valve Actuator Replacement

Auxiliary Temperature Valve Actuator Replacement

Removal Procedure

1. Remove the left rear quarter trim panel. Refer to Body Side Trim Panel Replacement - Left Side Body Side Trim Panel Replacement - Left Side.

2. Disconnect the electrical connector from the air temperature actuator.

3. Remove the retaining screws from the air temperature actuator.





4. Remove the air temperature actuator.

Installation Procedure





1. Install the air temperature actuator.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the retaining screws to the air temperature actuator and tighten to 1.9 Nm (17 lb in).

3. Connect the air temperature electrical connector to the actuator.

4. Install the left rear quarter trim panel. Refer to Body Side Trim Panel Replacement - Left Side Body Side Trim Panel Replacement - Left Side.