Lower Sliding Door Roller: Service and Repair

Rear Side Door Lower Roller Bracket Replacement

Removal Procedure

1. Support the bottom of the sliding door during lower roller bracket replacement.




2. Remove the bolts that retain the sliding side door lower roller bracket to the door.
3. Remove the sliding side door lower roller bracket from the track.
4. Remove the sliding side door lower roller bracket from the vehicle.

Installation Procedure




1. Install the sliding door lower roller bracket to the vehicle.
2. Install the sliding door lower roller bracket to the track.

Caution: Refer to Fastener Caution .

3. Install the bolts that retain the sliding side door lower roller bracket to the door and tighten to 25 Nm (18 lb ft).