LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (1 Of 2)) >> Engine Oil Cooler Housing Removal (1.6L LDE, LXV, 1.8L 2H0, and LUW)

Engine Oil Cooler Housing Removal (1.6L LDE, LXV, 1.8L 2H0, and LUW)

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Engine Oil Cooler Outlet Pipe And Bolts
    GM2026830Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 engine oil cooler pipe bolts (1).
  2. Remove the oil cooler pipe (2).
    3. Fig 2: Identifying Engine Oil Cooler Housing, Bolts And Engine Oil Cooler Inlet Pipe
    GM2026867Courtesy of GENERAL MOTORS CORP.
  3. Remove the 5 engine oil cooler housing bolts (2).
  4. Remove the engine oil cooler housing (1).
  5. Remove the engine oil cooler inlet pipe (3).
scientia non olet · About LEMON Manuals