Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-652: Flywheel Holder

For equivalent regional tools, refer to Special Tools .

Fig 1: Flywheel And Flywheel Holder

Courtesy of GENERAL MOTORS CORP.

Install the EN-652: holder (1), lock the flywheel via the starter ring gear.
Loosen the 6 flywheel bolts.
Remove the EN-652: holder (1).

Fig 2: Flywheel And Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the 6 flywheel bolts (1, 2).
Remove the flywheel (3).