LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (1 Of 2)) >> Cylinder Head Removal

Cylinder Head Removal

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cylinder Head Bolts Removal Sequence
    GM2027932Courtesy of GENERAL MOTORS CORP.
  1. Remove the 10 cylinder head bolts in sequence as shown.
    1. Loosen the 10 bolts 90° .
    2. Loosen the 10 bolts 180° .
  2. Remove the cylinder head and place on a suitable base.
  3. Remove the cylinder head gasket.
scientia non olet · About LEMON Manuals