LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (1 Of 2)) >> Crankshaft and Bearing Removal

Crankshaft and Bearing Removal

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Connecting Rod Beating Caps
    GM1948709Courtesy of GENERAL MOTORS CORP.
  1. Identify all the connecting rod bearing caps (1).
    2. Fig 2: Connecting Rod Bearing Caps 1 And 4
    GM1937053Courtesy of GENERAL MOTORS CORP.
  2. Remove the 4 bolts.
  3. Remove the connecting rod bearing caps 1 and 4 (1).
  4. Turn the crankshaft through 180°.
    5. Fig 3: Connecting Rod Bearing Caps 2 And 3
    GM1937048Courtesy of GENERAL MOTORS CORP.
  5. Remove the 4 bolts.
  6. Remove the connecting rod bearing caps 2 and 3 (1).
  7. Identify the crankshaft bearing caps.
    8. Fig 4: Crankshaft And Crankshaft Bearing Caps
    GM1937120Courtesy of GENERAL MOTORS CORP.
  8. Remove the crankshaft bearing caps (1).
  9. Remove the 10 bolts.
  10. Remove the crankshaft (2).
  11. Remove the crankshaft bearing clips.
scientia non olet · About LEMON Manuals