Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-45000: Remover

For equivalent regional tools, refer to Special Tools .

Fig 1: Crankshaft And Crankshaft Front Oil Seal

Courtesy of GENERAL MOTORS CORP.

CAUTION: Clean the crankshaft sealing surface with a clean, lint-free towel. Inspect lead-in edge of crankshaft for burrs/sharp edges that could damage the rear main oil seal. Remove burrs/sharp edges with crocus cloth before proceeding.

Using the EN-45000: remover, remove the crankshaft front oil seal (1) from the crankshaft (2).