Special Tools

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.

EN-652: Automatic Transmission Flex Plate Holder

For equivalent regional tools, refer to Special Tools .

Fig 1: Automatic Transmission Flex Plate And Holder

Courtesy of GENERAL MOTORS CORP.

Install the EN-652: holder (1) to hold the automatic transmission flex plate (2).
Loosen the 6 automatic transmission flex plate bolts.
Remove the EN-652: holder (1).

Fig 2: Automatic Transmission Flex Plate

Courtesy of GENERAL MOTORS CORP.

Remove the 6 automatic transmission flex plate bolts (2).
Remove the automatic transmission flex plate (1).