LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Symptom Troubleshooting & Diagnosis) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing (1.4L LUH and LUJ) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil pressure indicator switch and a NEW oil pressure indicator switch seal ring.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the oil pressure indicator switch to 20 N.m (15 lb ft).
scientia non olet · About LEMON Manuals