LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (2 Of 2)) >> Engine Coolant Thermostat Installation

Engine Coolant Thermostat Installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the engine coolant sealing surfaces.
  2. Fig 1: Identifying Engine Coolant Thermostat Assembly
    GM2028006Courtesy of GENERAL MOTORS CORP.
  3. Install the engine coolant seal (1).
  4. Install the engine coolant thermostat assembly (2).
  5. CAUTION: Refer to Fastener Caution .
  6. Install the 4 engine coolant thermostat bolts (3) and tighten to 8 N.m (71 lb in).