LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (2 Of 2)) >> Crankshaft and Bearing Cleaning and Inspection (1.6L LDE, LXV, 1.8L 2H0, and LUW) >> Crankshaft Out-of-Round, Check

Crankshaft Out-of-Round, Check

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Gauge Tool
    GM2190919Courtesy of GENERAL MOTORS CORP.
    NOTE: Crankshaft removed.
  1. Insert the crankshaft in the engine block.
  2. Install the GE-571-B:  gauge.
    1. Attach to the bracket on the engine block.
    2. Place the dial gauge plunger against the crankshaft bearing journal and adjust.
  3. Check the rotational play of the crankshaft.
    1. Turn the crankshaft evenly.
    2. Maximum permissible rotational play: 0.03 mm (0.001 in).
  4. Remove the GE-571-B:  gauge (1).
scientia non olet · About LEMON Manuals