K20 Engine Control Module X2 (LUJ)
 Courtesy of
|
Connector Part Information
- Harness Type: Engine
- OEM Connector: 12582677
- Service Connector: 88988931
- Description: 73-Way F 0.64 2.8 Series, Sealed (BK)
|
Terminal Part Information
- Pins: 1-5, 14-17, 20, 21, 24, 33, 35-37, 40, 46, 47, 49, 53, 56, 57, 60, 63, 65, 67, 69
- Terminated Lead: 13575812
- Release Tool: J-38125-213
- Diagnostic Test Probe: J-35616-64B (L-BU)
- Terminal/Tray: 33467-0005/23
- Core/Insulation Crimp: J/J
- Pins: 10, 11, 13, 28-31, 43, 44, 72
- Terminated Lead: 13575812
- Release Tool: J-38125-213
- Diagnostic Test Probe: J-35616-64B (L-BU)
- Terminal/Tray: 33467-0005/23
- Core/Insulation Crimp: K/K
- Pin: 73
- Terminated Lead: 13575291
- Release Tool: J-38125-11A
- Diagnostic Test Probe: J-35616-35 (VT)
- Terminal/Tray: 7116-4152-02/9
- Core/Insulation Crimp: A/5
|
K20 Engine Control Module X2 (LUJ)
| Pin |
Wire |
Circuit |
Function |
| 1 |
0.5 L-BU/VT |
2121 |
Ignition Control (1) |
| 2 |
0.5 BN/VT |
1744 |
Fuel Injector Control (1) |
| 3 |
0.5 BN/YE |
1746 |
Fuel Injector Control (3) |
| 4 |
0.5 BN |
844 |
Fuel Injector Control (4) |
| 5 |
0.5 YE/WH |
1745 |
Fuel Injector Control (2) |
| 6-9 |
- |
- |
Not Used |
| 10 |
0.75 GY/D-BU |
5282 |
Camshaft Phaser Exhaust Solenoid (1) |
| 11 |
0.75 VT/BN |
5284 |
Camshaft Phaser Intake Solenoid (1) |
| 12 |
- |
- |
Not Used |
| 13 |
0.75 RD/D-BU |
5290 |
Powertrain Main Relay Fused Supply (1) |
| 14 |
0.5 L-BU |
6814 |
Thermostat Engine Cool Control |
| 15 |
0.5 BN/RD |
581 |
Throttle Actuator Control Open |
| 16 |
0.5 BN/WH |
582 |
Throttle Actuator Control Close |
| 17 |
0.5 L-GN/L-BU |
2123 |
Ignition Control (3) |
| 18-19 |
- |
- |
Not Used |
| 20 |
0.5 BK/VT |
6272 |
Low Reference |
| 21 |
0.5 BK/GY |
6267 |
Camshaft CAM X Ground |
| 22-23 |
- |
- |
Not Used |
| 24 |
0.5 BK/L-GN |
6266 |
Camshaft CAM W Ground |
| 25-27 |
- |
- |
Not Used |
| 28 |
0.75 RD/D-BU |
5290 |
Powertrain Main Relay Fused Supply (1) |
| 29 |
0.75 BN/WH |
6783 |
Low Reference |
| 30 |
0.75 BK/VT |
6754 |
Low Reference |
| 31 |
0.75 YE/D-BU |
231 |
Oil Pressure Switch Signal |
| 32 |
- |
- |
Not Used |
| 33 |
0.5 YE/D-BU |
2124 |
Ignition Control (4) |
| 34 |
- |
- |
Not Used |
| 35 |
0.5 BK/L-BU |
2129 |
Low Reference |
| 36 |
0.5 VT/L-BU |
6270 |
Crankshaft 60X Sensor Voltage |
| 37 |
0.5 GY/YE |
6457 |
Camshaft CAM X Supply Voltage |
| 38-39 |
- |
- |
Not Used |
| 40 |
0.5 GY/L-BU |
6259 |
Camshaft CAM W Supply Voltage |
| 41-42 |
- |
- |
Not Used |
| 43 |
0.75 BN/RD |
416 |
5 Volt Reference |
| 44 |
0.75 BK/YE |
2752 |
Low Reference |
| 45 |
- |
- |
Not Used |
| 46 |
0.5 GY |
5641 |
Turbo Boost Pressure Sensor Temperature Signal |
| 47 |
0.5 BK/L-GN |
1664 |
Heated Oxygen Sensor Low Signal Bank 1 Sensor (1) |
| 48 |
- |
- |
Not Used |
| 49 |
0.5 BK/YE |
1716 |
Low Reference |
| 51-52 |
- |
- |
Not Used |
| 53 |
0.5 L-BU/WH |
2122 |
Ignition Control (2) |
| 54-55 |
- |
- |
Not Used |
| 56 |
0.5 L-GN |
6271 |
Crankshaft 60X Sensor Signal |
| 57 |
0.5 VT/BK |
6264 |
Camshaft CAM X Signal |
| 58-59 |
- |
- |
Not Used |
| 60 |
0.5 YE/VT |
6265 |
Camshaft CAM W Signal |
| 61-62 |
- |
- |
Not Used |
| 63 |
0.5 BN/L-GN |
485 |
Throttle Position Sensor Signal (1) |
| 64 |
- |
- |
Not Used |
| 65 |
0.5 BN/D-BU |
486 |
Throttle Position Sensor Signal (2) |
| 66 |
- |
- |
Not Used |
| 67 |
0.5 L-GN |
1665 |
Heated Oxygen Sensor High Signal Bank 1 Sensor (1) |
| 68 |
- |
- |
Not Used |
| 69 |
0.5 VT/GY |
496 |
Knock Sensor Signal (1) |
| 70-71 |
- |
- |
Not Used |
| 72 |
0.75 GY/WH |
3113 |
Heated Oxygen Sensor Heater Low Control Bank 1 Sensor (1) |
| 73 |
2.5 BK |
450 |
Ground |