K9 Body Control Module X2
 Courtesy of
|
Connector Part Information
- Harness Type: Instrument Panel
- OEM Connector: 13594133
- Service Connector: 19151266
- Description: 27-Way F 0.64 2.8 Series (L-BU)
|
Terminal Part Information
- Pins: 1-4
- Terminated Lead: 13575560
- Release Tool: J-38125-12A
- Diagnostic Test Probe: J-35616-35 (VT)
- Terminal/Tray: SNAC-A081T-M028/20
- Core/Insulation Crimp: A/D
- Pins: 7, 8, 11, 13-16, 19, 21-25, 27
- Terminated Lead: 13575870
- Release Tool: J-38125-12A
- Diagnostic Test Probe: J-35616-64B (L-BU)
- Terminal/Tray: SNAC3-A021T-M064/20
- Core/Insulation Crimp: J/J
- Pin: 10, 26
- Terminated Lead: 13575870
- Release Tool: J-38125-12A
- Diagnostic Test Probe: J-35616-64B (L-BU)
- Terminal/Tray: SNAC3-A021T-M064/20
- Core/Insulation Crimp: J/J
|
K9 Body Control Module X2
| Pin |
Wire |
Circuit |
Function |
| 1 |
1.5 RD/GY |
2140 |
Battery Positive Voltage |
| 2 |
2.5 BK |
850 |
Ground |
| 3 |
1.5 RD/D-BU |
2540 |
Battery Positive Voltage |
| 4 |
2.5 RD/GY |
2840 |
Battery Positive Voltage |
| 5-6 |
- |
- |
Not Used |
| 7 |
0.5 D-BU/YE |
5361 |
Brake Apply Sensor Signal |
| 8 |
0.5 YE |
6817 |
LED Backlight Dimming Control |
| 9 |
- |
- |
Not Used |
| 10 |
0.35 WH/L-BU |
278 |
Ambient Light Sensor Signal |
| 11 |
0.5 YE |
7554 |
Park Lock Solenoid Soft Control (MH8) |
| 12 |
- |
- |
Not Used |
| 13 |
0.5 WH |
5359 |
Brake Apply Sensor Supply Voltage |
| 14 |
0.5 D-BU/VT |
1788 |
Traction Control Switch Signal (1) |
| 15 |
0.5 OG/WH |
781 |
Driver Door Lock Switch Unlock Signal |
| 16 |
0.5 GY |
3273 |
Remote Function Actuator Return |
| 17-18 |
- |
- |
Not Used |
| 19 |
0.5 OG/YE |
780 |
Driver Door Lock Switch Lock Signal |
| 20 |
- |
- |
Not Used |
| 21 |
0.5 L-GN/GY |
6135 |
Linear Interconnect Network Bus 4 |
| 22 |
0.5 L-GN |
5060 |
Low Speed GMLAN Serial Data |
| 23 |
0.5 WH |
2501 |
High Speed GMLAN Serial Data (-) (1) |
| 24 |
0.5 D-BU |
2500 |
High Speed GMLAN Serial Data (+) (1) |
| 25 |
0.5 GY/WH |
3272 |
Remote Function Actuator Supply Voltage |
| 26 |
0.35 D-GN/WH |
111 |
Hazard Switch Signal |
| 27 |
0.5 D-BU/WH |
3275 |
Remote Function Actuator Receive Signal |