Lifter / Lash Adjuster: Service and Repair

Valve Lifter Replacement (1.6L LDE, LXV, LLU and 1.8L 2H0, LFH)

Special Tools

EN-845 - Suction Device

For equivalent regional tools, refer to Special Tools Special Tools.

Removal Procedure

1. Remove the camshafts. Refer to Camshaft Replacement (1.8L LUW and LFH) Camshaft Replacement.





Note: Mark the assignments.

2. Remove the 16 valve lifters (1), using the EN-845 - suction device.

Installation Procedure





Note: Observe the correct assignment.

Note: Coat the sliding surfaces with NEW engine oil.

1. Install the 16 valve lifters (1), using the EN-845 - suction device.
2. Install the camshafts. Refer to Camshaft Replacement (1.8L LUW and LFH) Camshaft Replacement.