LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Clutch Pedal Position Sensor And Bolt
    GM2028127Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the clutch pedal position sensor wiring harness plug.
  2. Remove the clutch pedal position sensor bolt (2).
  3. Remove the clutch pedal position sensor (1).
scientia non olet · About LEMON Manuals