Clutch Pedal Hard to Push
WARNING: This page is about a different variant/trim than selected.
Clutch Pedal Hard to Push
| Cause |
Actions |
| DEFINITION: The clutch pedal requires high effort to operate. Review the Symptoms - Clutch and perform the necessary inspections. |
| Incorrect hydraulic fluid. |
- Inspect for the correct fluid in the master cylinder. Refer to Hydraulic Clutch System Bleeding .
- If mineral oil is found, replace the clutch master cylinder, the clutch actuator cylinder, and flush the hydraulic system and fill with the correct fluid. Refer to Clutch Master Cylinder Replacement , and Hydraulic Clutch System Bleeding .
|
| Contaminated hydraulic fluid. |
- Inspect the hydraulic fluid for water.
- Inspect the hydraulic fluid for dirt or debris.
- Inspect the clutch hydraulic fluid for contamination of mineral oil. If contaminated, replace the clutch master cylinder and the clutch actuator cylinder. Refer to Clutch Master Cylinder Replacement .
- Flush the hydraulic system and fill with the correct fluid. Refer to Hydraulic Clutch System Bleeding .
|
| Clutch pedal binding. |
- Inspect the pedal for binding.
- Replace the pedal. Refer to Brake, Accelerator, and Clutch Pedal Replacement
.
|
| Clutch pedal spring worn. |
- Inspect the clutch pedal spring for wear.
- Replace the clutch pedal. Refer to Brake, Accelerator, and Clutch Pedal Replacement
.
|
| Kinked or damaged clutch actuator cylinder front pipe. |
- Inspect for a kinked or damaged clutch actuator cylinder front pipe.
- Replace the clutch actuator cylinder front pipe. Refer to Clutch Actuator Cylinder Front Pipe Replacement .
|
| Clutch disc worn too thin. |
Replace the clutch assembly. Refer to Clutch Pressure and Driven Plate Replacement (1.4L LUJ) , Clutch Pressure and Driven Plate Replacement (1.8L LUW) . |