Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2076
The ECM detects an intake manifold tuning valve actuator that has initiated its learn sequence for greater than 5 s and the valve position is between 5-35%
OR
The ECM detects an intake manifold tuning valve actuator that has initiated its learn sequence for greater than 0.2 s and the valve position is between 5-35% for greater than 10 times in one ignition cycle.
P2077
The ECM detects a continuous open or short to low in the intake manifold tuning valve position sensor circuit.
P2078
The ECM detects a continuous short to high in the intake manifold tuning valve position sensor circuit.